Projects

57,500 square foot pre-engineered Varco Pruden  metal building for livestock shows, rodeos and other special events. Structure features a 150 foot by 250 foot clear arena floor, grandstand seating, restroom/locker facilities, and special livestock areas.  Manasota Commercial Construction was the Construction Manager responsible for the building and site improvements.  Staff responsible for all project management, contracts administration, tax exempt coordination, material procurement and sub-contractor management.

3,400sf pre-engineered metal building for replacement helicopter hanger including 2 motorized overhead doors and hanger door.

2,400sf pre-engineered metal building for storage with 3 overhead motorized doors.

Project required constant coordination for continued access for spray vehicles within this owner occupied facility for aerial and ground spraying. The concrete paving removal and replacement operations also had to be coordinated to maintain aerial landing times on concrete landing pad in front of the hanger building. Special care and preplanning had to be taken during demolition operations with fuel tanks and chemicals on site.

3,500sf pre-engineered Varco Pruden metal building with masonry external walls for use as a laboratory and offices.

Project required new ADA entry added to existing building and interior remodel  of existing building to update facility for ADA compliance and code. All existing windows replaced to meet hurricane codes. Attachment of the 3,500sf addition to the existing building was accomplished through a corridor connecting the two buildings. All electrical service had to be tied into the existing building service.  Parking relocated as previously where new building is located

7,500sf pre-engineered Varco Pruden metal building for use as a manufacturing facility and warehouse with air conditioned office space.   Split faced masonry external walls were used  to provide an attractive exterior facade.  Truck delivery area with insulated overhead doors required extended height requirements. The warehouse included epoxy floors, interior exposed duct work and LED lighting that reduced the number of fixtures & increased light.  Manasota Commercial Construction is the General Contractor responsible for the building and site improvements

Winner VP 2019 Hall of Fame- Automotive Category Winner

15,600sf pre-engineered Varco Pruden metal building for use as a manufacturing warehouse with air conditioned office space.   Split faced masonry external walls were used  to provide an attractive exterior facade.  Car delivery area with overhead doors required extended height requirements for RV’s. The warehouse included Swiss Trax floors, interior exposed duct work and humidity controlled conditioned warehouse space. Additional covered steel pavilion for car care also constructed by Manasota Commercial Construction, the Construction Manager responsible for the building and site improvements.

*Winner VP 2020 Hall of Fame-Manufacturing category

9,000sf pre-engineered Varco Pruden metal building for use as a manufacturing warehouse with air conditioned office space and storage mezzanine.

Building used concrete & stone full height masonry front face facade enhancement with decorative awnings above all windows for street appeal in high end technology park. Delivery area with overhead doors required extended height requirement. The warehouse includes interior exposed duct work and humidity controlled conditioned warehouse space due to storing technology.  Open designed office space for high tech appearance has  specialized R&D areas. Building designed with layout to accommodate maximum shipping & receiving circulation, and expandable end wall for future growth.

This Varco Pruden 8,000sf pre-engineered metal building house offices and pharmaceutical preparation & distribution spaces for long term care facilities. This facility’s layout was designed to accommodate separate receiving area & distribution control areas with overhead doors that are located in the rear of building. The specialized sterile rooms, to meet federal guidelines for intravenous medication preparation, include specialized HVAC and filtration systems, flooring surfaces and electrical. The office space includes a large training room. Stucco façade over the metal building was used to enhance the street view. Due to the nature of the business this building is equipped with enhanced security & monitoring systems and interior door access controls.

This 26,000sf pre-engineered Varco Pruden metal building was designed for use as a manufacturing facility with air conditioned corporate office space. Manufacturing areas have enhanced ventilation and 480 volt electrical service components for heavy manufacturing equipment. This building’s layout was designed to accommodate maximum shipping & receiving circulation with overhead doors at 2 truck wells. The manufacturing area includes full fire protection systems and a 2^nd floor warehouse supervisor’s office. The air conditioned corporate office’s include meeting space, design center and kitchen. This building was also designed with an expandable end wall for future growth. All site work completed by Manasota who was the Construction Manager for this project.

This 33,500sf pre-engineered Varco Pruden metal building was designed for use as a distribution facility with air-conditioned corporate offices & sales space. Distribution warehouse areas have enhanced cross ventilation with exhaust fans and 3 roll up doors and 480 volt electrical service components. This building’s layout was designed to accommodate maximum shipping & receiving circulation with double overhead doors at 2 truck well bays. The building includes full fire protection systems and a 2^nd floor corporate office. The air-conditioned office space includes 1st floor sales space, conference room , 2 story entry product slat wall and break room/kitchen. Stone veneer on the front of the building and canopy entry were used to enhance the metal building appearance to also serve as a sales showroom.

2,400sf renovation of their existing warehouse office space was also completed at the same time.

Manasota was the Construction Manager on this project. 

Project Description:

11,250sf pre-engineered Varco Pruden metal building for use as a warehouse & distribution of corrugated cardboard boxes with air conditioned office space.   Split faced masonry construction for external walls used to provide attractive exterior facade.  Truck loading well and loading dock with overhead doors required extended height requirements.  Manasota Commercial Construction is the general contractor responsible for the building and site improvements.